beautypg.com

Recording a conversation – Radio Shack 5.8 GHz Multi-Handset Expandable Cordless Telephone with Digital Answerer User Manual

Page 63

background image

T

he I

n

tegrat

ed

A

n

swering Device

63

Voice memo

The voice memo function allows the user to
record messages (more than two seconds
and within four minutes). Ô

1. In standby mode, press the

RECORD

soft key on the base.

2. Press the

START

soft key.

3. Start your recording after the

announcement “Record Memo
Message” and a confirmation tone.

4. When you have finished, press the

STOP

soft key to stop recording.

The system returns to standby.

Recording a conversation

You can record a conversation from the
handset or the base (more than two
seconds and within ten minutes). Ô

1. During a conversation, press

the

MENU

soft key.

2. Press

VOL/RING/

or

VOL/RING/

to

select

Call Record

, and then press

the

OK

soft key.

Recording a Call

appears on the

display. A confirmation tone, that can
be heard by both parties, sounds
during recording.

3. To stop recording:

From Handset - press the

MENU

soft

key and

VOL/RING/

or

VOL/RING/

to

select

Call Record

, and then press

the

OK

soft key. You will hear a

confirmation tone.
From Base - press

XPLAY/

STOP

. Or

press the

MENU

soft key,

VOL/RING/

or

VOL/RING/

to select

Call

Record

, and then press the

OK

soft

key. You will hear a confirmation tone.

Ô

NOTES

Ô

Voice memo

The voice memo
messages are recorded
as incoming messages.

When the answering
system is full,

appears on the display
and recording is
terminated.

If an outside call is
received during the
operation, the operation
is canceled.

Recording a conversation

Every state has different
regulations governing
the recording of
conversations over the
telephone. Make sure to
check your local, state
and federal laws before
using this product to
record any telephone
conversation in order to
determine that your use
is in compliance with
such laws or guidelines.

When the answering
system becomes full,

appears on the display
and recording is
terminated.