Radio Shack ET-542 - Manual (Page 11)

11
CHANGING CHANNELS
Your ET-542’s auto-scan feature auto-
matically selects a clear channel when
you pick up the phone. If you experi-
ence interference during a call, press
CH to switch to another channel (25 in
all) until you receive better reception.
USING REDIAL
To quickly redial the last number di-
aled, simply lift the handset and press
TALK , then press REDIAL/PAUSE .
The redial memory holds up to 80 dig-
its in the tone mode or 79 digits in the
pulse mode. The redial memory also
holds pause entries (see “Entering a
Pause” under “Memory Dialing”).
Note: We recommend you not use
REDIAL/PAUSE to dial numbers that in-
clude a tone entry ( TONE/ ) (see “Us-
ing Tone Services on a Pulse Line”).
USING FLASH
Use FLASH on the handset to perform
the switchhook operation for special
services, such as call waiting.
For example, if you have call waiting,
press
FLASH to take an incoming call
without disconnecting the current call.
Press
FLASH again to return to the
first call.
Notes:
• If you do not have call waiting,
pressing FLASH might disconnect
the current call.
• The redial memory does not store
a FLASH entry or any digits
entered after you press FLASH .
illustration
illustration
illustration
43-1042.fm Page 11 Tuesday, August 17, 1999 10:28 AM