Ruckus Wireless 2825 - Manual (Page 61)

USM-2825-RKS1-012907-01 Ruickus Wireless 2825 Wireless Multimedia Router 61
Performing Auto Provisioning
2825 Parameters Not Included in Auto Provisioning
The following less common parameters are not included. If you need to synch these parameters, you must
configure them using the web user interface or the CLI (if provided) (
Table 21 ).
Factory Reset
When the adapter is factory reset (by pressing the reset button on the back of the unit for more than 8
seconds), the auto provisioned parameters will be lost. The adapter will go back to the original parameters
as provisioned from the factory. If you want to retain the parameters from the AP, you must repeat the auto
provisioning process described above.
SSID Configured Service Set Identifier
Encryption mode Configured encryption mode status
Cipher Configured security encryption cipher
Authentication type Configured authentication method
Passphrase Configured Pre-Shared Passphrase
WEP keys Configured WEP Pre-Shared Keys
Default key Configured WEP default key number
Table 21— 2825 Parameters Not Included in Auto
Provisioning
Parameter Description
User name and
Password You may want the AP and Adapter
to have different username and
password
Country Code
Fixed Mode Set during manufacturing
Table 20— 2825 Parameters Included in Auto Provisioning
Parameter Description