Ruckus Wireless 2825 - Manual (Page 32)

32 Ruckus Wireless 2825 Wireless Multimedia Router USM-2825-RKS1-012907-01
Configuring the 2825
Table 13—Threshold Settings Parameters
Field Description
DTIM Interval The value indicates the interval of the Delivery Traffic Indication
Message (DTIM). This is a countdown field that Access Point (AP)
informs its clients of the next window for listening to broadcast or
multicast messages. The default value is 1.
Fragment Threshold This value indicates the maximum length of a packet before data is
fragmented into multiple packets. In a good wireless environment, the
larger the fragment, the more efficient the network operates. In a noisy
environment, the threshold should be adjusted to a smaller size to
minimize retransmission and increase the reliability of the
transmission. The default value is 2346.
RTS/CTS Threshold The threshold is a value that determines at what packet length the
RTS/CTS function is triggered. A lower threshold may be necessary in
environment with excessive signal noise or hidden nodes; but this may
result in some performance degradation. The default value is '2346'.