Radio Shack 43-5829 - Manual (Page 98)

Beyond the Basics
98
Command Function Command Function
0 then 1 Repeat a
message*
0 then 6 Answering
system on
0 then 2 Play
incoming
messages
0 then 7 Memo
record
start/stop
0 then 3 Skip a
message
0 then 8 Greeting
message
record
start/stop
0 then 4 Delete a
message
0 then 9 Answering
system off
0 then 5 Stop
operation
1 then 0 Help
* If you press 0 then 1 in the fi rst four seconds
of a message, the system skips to the previous
message. If you press 0 then 1 after the fi rst
four seconds of a message, the system repeats
the current message.
When you fi nish, you will hear intermittent beeps
indicating that the system is in the command
waiting mode. Enter another command from the
chart within two seconds.
Hang up to exit the system. The answering
system automatically returns to its normal
standby setting.
5.
6.