Radio Shack 43-5829 - Manual (Page 59)

59
Beyond the Basics
Adjusting the Audio Tone
If you aren’t satisfi ed with the audio quality of your
phone, you can adjust the Audio Tone of the earpiece
during a call. Your phone gives you three audio tone
options: low, natural and high; the default setting,
Natural Tone, is recommended for hearing aid users.
Audio tone adjustments only apply to the earpiece,
not the speakerphone.
To adjust the audio tone:
With the phone in talk mode, press SELECT/ to
cycle through the three audio tone options.
When the desired option appears on the display,
stop.
After two seconds, the displayed audio tone is
set, and the display returns to normal.
Using the Clarity Boost Feature
If you encounter interference while using your phone,
you can manually improve the sound by setting the
clarity booster to on. This works only when the
phone is in use, so while you are on a call:
Press MENU/CLEAR.
Move the cursor to CLARITY BOOST, and then
SELECT/ . BOOST ON and B appear in the
display.
Use the same procedure to turn off clarity booster.
BOOST OFF appears.
1.
2.
3.
1.
2.