Beyond the basics – Radio Shack 43-5829 User Manual

Page 83

Beyond the Basics

From the base

From the handset

Press MENU/CLOCK

four times. The base

displays the current

number of rings

recording time (1

minute, 4 minutes, or

A for announce only)

and announces the

setting.
Press /select or

/select until the

desired message

record time appears.
Press SET to select

the new recording

time. A confi rmation

tone sounds, and the

system announces

the new record time.

Press MENU/CLEAR.

Select the ANSW.

SETUP menu, and

then the RECORD

TIME submenu.
Move the cursor

to select RECORD

TIME (1 MINUTE,

4 MINUTES, or

ANNOUNCE ONLY).
Press SELECT/ .

You will hear a

confi rmation tone.

While your answering system is set to Announce

Only, the message counter LED on the base displays

“A.” If you are using the prerecorded greeting, the

system automatically switches to the following

message: “Hello, no one is available to take your

call. Please call again.” If you are using a personal

greeting, the system continues to use that greeting.