beautypg.com

Wake to buzzer alarm – Roberts Radio R9943 User Manual

Page 13

background image

If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)

12

Wake to buzzer alarm

A bleep tone will sound when using the buzzer alarm. The alarm bleep
will increase in volume every 15 seconds for one minute followed by one
minutes silence before repeating the cycle. The buzzer alarm will sound
for one hour unless turned off by pressing the On/Off button. Pressing
the On/Off button whilst the alarm is sounding will cancel the alarm for
24 hours.

1. Ensure that the radio switched off.

2. Press and hold down the

button until the hour digits and alarm

symbol flash in the display.

3. Press the Tuning up/down buttons to set the required hour. The

clock uses the 24 hour system e.g. 2:00pm is shown as 14:00

4. Press the

button, the minutes digits and alarm symbol will flash

in the display.

5. Press the Tuning up/down buttons to set the required minute.

6. Press the

button to complete alarm setting.

7. To permanently cancel the alarm press the

button until the

symbol is removed from the display.