Roberts Radio R9943 - Manual (Page 11)

If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
10
Presetting stations
There are 5 memory presets for each of the 3 wavebands.
1. Press the On/Off button to turn on the radio.
2. Tune to the required station using one of the methods previously
described.
3. Press and hold down the required Preset button until the radio
beeps (greater than 2 seconds) The preset number will appear in
the display and the station will be stored under the chosen preset
button.
4. Repeat this procedure for the remaining presets.
5. Stations stored in preset memories may be overwritten by following
the above procedure.