beautypg.com

S-0816, S-1608, Foh unit – Roland S-0816 User Manual

Page 2: Stage unit

background image

STAGE

Front of House

Master Console

16 inputs

8 outputs

16 inputs

8 outputs

8 outputs

8 outputs

16 inputs

16 inputs

32 x 16 setup

STAGE

MONITOR

Front of House

Master

Console

Monitor

Console

16

inputs

8

outputs

16

inputs

8

outputs

16 inputs

16 inputs

8 outputs

8 outputs

32 x 16 setup with split

REAC Splitter

16

inputs

16

inputs

16

inputs

16

inputs

S-1608

S-0816

S-1608

S-1608

S-0816

S-0816

S-0816

S-0816

S-1608

S-0816

REAC - The Audio Quality Standard for Digital Snake Systems

S-0816

FOH Unit

Unlike analog multicore snake cables, RSS Digital Snake systems are

equipped with high quality and remote-controllable mic pre-amps. The

pre-amps of RSS Digital Snake systems have been specially designed

for live audio applications and is made of high quality components

carefully selected by Roland's engineers.

Use Multiple S-1608/0816 Digital Snake System to create multiple

stage configurations such as Left, Right and Center stage unit

positions. Simply run Cat5e cables to FOH units in Front of House

position for easy cable management.

Because REAC is based on standard Ethernet technology, the

individual audio inputs coming into S-1608/0816 digital snake

system can be recorded via the Gigabit Ethernet port of PC

computer. DAW software to capture the audio signal is now under

development by Cakewalk and will be released in the near future.

This will make multi-channel live recording easier than ever before.

Create Multiple Stage Configurations

REAC Technology

The REAC (Roland Ethernet Audio Communication) protocol is an

industry proven, low latency, high quality 24bit/96kHz audio transfer

protocol used by the S-1608 and S-0816. The REAC protocol allows

the Digital Snake signal to be “split” to as many positions as required

such as monitor, broadcast and recording locations using S-4000-SP

REAC Splitter or any standard gigabit Ethernet switch.

The S-1608/0816 Digital

Snake System can be

used easily expand the

channel count of the S-

4000 32x8 Digital Snake

System to 48x16 or more.

Mix and match S-4000

and S-1608/0816 Digital

Snake systems for

customizable rental and

installation systems.

High Resolution Sound Quality

By having high quality mic-pres on stage, the sound is amplified and

converted at the closest point to the sound source, providing the best

possible quality audio. By using Cat5e cable instead of large multi-core

copper cable, the S-1608/0816 digital snake system is immune to the

“hums and buzzes” caused by electrical noise and ground issues.

Ideal Channel Count Expansion for the S-4000
Digital Snake System

Easy and Expandable

Remote-controllable

REAC technology will make easy
recording split

The S-1608/0816 Digital Snake system is ideal for bands, corporate A/V events, seminars, rental and

staging houses, House of Worship and broadcasters that needs the best possible sound quality from

their audio without the high frequency losses and bulk of analog snakes.

S-1608

Stage Unit

The S-1608 and S-0816 Digital Snake are compact versions of the popular S-4000 Digital Snake system.

Easy to use and quick to install, the S-1608/0816 Digital Snake system is a small format audio snake

solution that offers the highest quality audio signal available in a portable snake system.

The snake comes with high quality pre-amp

Master

Outputs source audio to the Slave and Split devices
It receives Input from the Slave device.

Slave

Split

Receives Input from and sends output to the Master device.

Receives Input from all of the Master device’s sources.

Analog Output Terminals

On board 24bit/96kHz
DA converters.

Analog Input Terminals

On board 24bit/96kHz AD
converters and high quality mic
pre-amps with phantom
power supply.

REMOTE Terminal (RS-232C)

Connector for either the dedicated
remote controller (S-4000R) or
computer installed with S-4000-RCS
remote control software.

Digital Output (Optical)

Output the audio signal input
to INPUT 1/ 2 of the S-1608 /
0816 for monitoring sync.

Mute All Output Button

When this button is pressed
and held, all outputs in the
system will be muted.

Mode Selection Switch

S-4000R or S-4000RCS provide easy remote control of all input

gain adjustment, phantom power and PAD settings.

This manual is related to the following products: