Roland COLORCHOICE - Manual (Page 44)

44
5. Select ‘ColorCAMM PRO’ or ‘CAMM JET’ from the ‘Options’ menu of color List Palette. All the Spot
Colors and the Cut Contour color will be listed in the Color Library window. Select all the colors that will
be used. You can select multiple colors pressing the Ctrl key.
6. Click OK. The Special Colors will be added to the Color List Palette.
7. To make a cutting line, select “CutContour” as the color for the paths that you would like to cut. To make
an object that will be printed using a spot color, just fill it using a Spot color from the Color List Palette.
QuarkXPress 4
[Macintosh]
1. Select Edit>Color and click Add from the Default Color dialog.
2. Execute File>Import and select the file ‘ColorCAMMPRO QuarkXPress’ or ‘CAMM JET QuarkXPress’,
located in the ‘SpotColorLibray:ColorCAMM PRO or CAMM JET:QuarkXPress’ folder. (It is best to copy
this file to your Hard Disk before importing it.)
3. Click "Select All" to move all the items to Use Items and click OK.
4. Click Save to save the color palette.
5. Use the added color palette to create the new design.
PageMaker 6.5
[Macintosh]
1. Copy the file ‘ColorCAMM PRO.bcf’ or ‘CAMMJET.bcf’, located in the ‘SpotColorLibray:ColorCAMM
PRO or CAMM JET:PageMaker6.5’ folder to the ‘Pm6.5:RSRC:Usenglsh:Color’ folder.
2. Create a new design or open an existing file.
3. Click Window>Color and display the Color Palette. Click on the New icon from the Color Palette.
4. Select ColorCAMM PRO or CAMM JET from the Color Edit Library pull down menu.
“CutContour” will be displayed in the Color Library window.
5. Click OK. Color Edit dialog is displayed.
6. Click OK to close the dialog.
7. “CutContour” will be added in the Color Palette. Use this palette to define the Cut line. Use this palette to
define the Cut line and the objects that will be printed using Spot color ribbons.