Runco VX-1000d - Manual (Page 60)

Operation
48 Runco VX-1000d Owner’s Operating Manual
PRE
L
IMINAR
Y
Resolution: The DHD Controller defaults to an output resolution of 720p. When using the
VX-1000d with a computer or certain HD sources, you may want to force the DHD
Controller to use a different output resolution. If so, select Resolution from the Service
menu and choose one. Then, press ENTER to confirm.
System Reset: To reset ALL projector and controller settings (including image settings)
back to their factory defaults, choose System Reset from the Service menu.
A confirmation message appears, reminding you to save your settings before you perform
the reset, so that you can restore them afterwards. If you have done this, select Confirm to
continue with the reset. Otherwise, click Back to cancel.
Restore Saved Settings: Following a System Reset, select Restore Saved Settings to
apply all previously-saved settings to the projector and DHD Controller.
This action is not undoable. Proceed with caution! Before you
perform a System Reset, save ALL settings, including “Custom” ISF
Presets (page 42), ISF Day/Night presets (page 44), Output Shift
settings (page 44), Input Names (page 45) and Trigger settings
(page 47).
Caution