Runco VX-1000d - Manual (Page 49)

Operation
Runco VX-1000d Owner’s Operating Manual 37
PRE
L
IMINAR
Y
Picture Use the controls in the Picture Menu to calibrate your VX-1000d for optimum picture
quality.
The VX-1000d has been designed to incorporate setup and calibration standards
established by the Imaging Science Foundation (ISF). The ISF has developed carefully
crafted, industry-recognized standards for optimal video performance and has
implemented a training program for technicians and installers to use these standards to
obtain optimal picture quality from Runco video display devices. Accordingly, Runco
recommends that setup and calibration be performed by an ISF certified installation
technician.
All signal types require separate processing. Therefore, you need to calibrate each input
separately. Runco recommends calibrating the VX-1000d inputs in the following order:
1. Component SD
2. S-Video 1 / S-Video 2
3. Composite
4. HD/RGB 1 / HD/RGB 2
5. DVI 1 / DVI 2
Virtualwide 2.35 A 2.35 image is stretched anamorphically in
both directions to fill a 16:9 image. (The
secondary anamorphic lens then
“stretches” the image back to 2.35:1.)
Virtualwide 2.35 is available only on
VX-1000d projectors equipped with the
CineWide option.
Table 4-1. Aspect Ratio Settings (continued)
Aspect Ratio Description
2.35:1 Image on
16:9 Screen
2.35:1 Image on
16:9 Screen with
VirtualWide 2.35
2.35:1 Image on
2.35:1 Screen with
VirtualWide 2.35
Picture
Brightness
Contrast
Color
Tint
Sharpness
When you change a picture quality setting, save the change to a
preset afterwards. Otherwise, the change will be lost when a
different input is selected. (Picture quality settings are saved for
each input and resolution separately.) For information about saving
settings, refer to
ISF Presets on page 42.
Note