Runco VX-1000d - Manual (Page 44)

Operation
32 Runco VX-1000d Owner’s Operating Manual
PRE
L
IMINAR
Y
4.4
Lens Adjustments
Focus and Zoom To focus the projected image, gently rotate the lens by
hand.
To enlarge the picture (zoom in), move the zoom tab
toward the Runco logo on the front of the projector. To
make the picture smaller (zoom out), move the tab in the
other direction.
Vertical Lens Shift To change the projected image position, use a 9/64” hex driver to shift the lens in the
desired direction; see Figure 4-1. The vertical lens shift control is at the top of the
projector. (The tool will automatically center on top of the adjustment nut when inserted
into the access hole.)
Figure 4-1. Vertical and Horizontal Lens Shift Adjustments
➤
Zoom
in
Focus
Zoom
out
➤
9/64” Hex Wrench