2 quick setup, Table 3-1 . installation overview, Quick setup – Runco VX-1000d User Manual
Page 29: Pre l iminar y
Runco VX-1000d Owner’s Operating Manual
17
PRE
L
IMINAR
Y
3.2
Quick Setup
Table 3-1 gives a quick overview of the VX-1000d installation process. The sections
following this one provide detailed instructions.
Installation should be performed by a qualified custom video
installation specialist.
Table 3-1. Installation Overview
Step
Procedure
For Details, Refer to
page...
1
Choose a location for the projector
2
Install CineWide (secondary anamorphic) lens (optional)
3
Connect the DHD Controller to the projector
4
Connect signal sources to the DHD Controller
5
Connect external controller to RS-232 port (optional)
6
Connect other home theater components to 12-volt trigger
outputs (optional)
7
Apply power to the projector
8
For rear-screen and/or ceiling-mount installations, select
the proper picture orientation
9
Lens adjustments: projected image size (zoom), position
(shift) and focus
10
Projector calibration: adjust the following
for each input,
starting with Component SD; save settings when finished:
• Aspect ratio
• Brightness
• Contrast
• Color level
• Tint
• Input position
Note