Radio Shack TAD-1024 - Manual (Page 8)

8
PREPARATION
SETTING THE DAY
AND TIME
The TAD records the day and time of the
call with each phone message. Follow
these steps to set the current day and
time.
Notes:
• To avoid having to reset the time if
AC power is lost, we recommend
you install a backup battery before
you set the day and time.
• If you do not complete each step
within 8 seconds, the TAD stops
setting and announces the day and
time. Start again from Step 1.
1. Hold down STOP/TIME SET until the
TAD announces, “Sunday.” CL
(clock) then 01 appears on the dis-
play.
Note: Adjust VOLUME on the right
side of the TAD to the desired lis-
tening level.
2. To change the day of the week, re-
peatedly press MEMO/REPEAT to
move backward or CODE/SKIP to
move forward until the TAD an-
nounces the desired day of the
week.
3. Press STOP/TIME SET . The TAD an-
nounces the preset hour.
4. To change the hour, repeatedly
press MEMO/REPEAT to move back-
ward or CODE/SKIP to move forward
to the desired hour.
5. Press STOP/TIME SET . The TAD an-
nounces the preset minute.
6. To change the minutes, hold down
MEMO/REPEAT to move backward
or CODE/SKIP to move forward to
the desired minute.
7. Press STOP/TIME SET to confirm the
settings. The TAD announces the
day and time and
CL disappears.
To check the current day/time at any
time, press
STOP/TIME SET .
VOLUME
43-784.fm Page 8 Monday, August 16, 1999 7:47 AM