RCA VR636HF - Manual (Page 37)

35
RECORDING
3. If your VCR viewing channel is 3 or 4, make sure the VCR
indicator appears in the VCR’s display panel. If not, press the
TV•VCR button on the remote to turn it on.
4. Use the SPEED button on the remote to select a recording speed.
The tape speed indicator appears on the TV screen.
5. Select the channel or line input to be recorded.
6. Set the Reception: STEREO/MONO/SAP feature for the type of
audio you want to record. See “Audio Set-Up Features” in the
Other Features section.
AUDIO
1 Reception: STEREO
2 Tape Playback: HI-FI
0 Exit
7. Press RECORD to start recording.
8. Press STOP when you are finished.
Recording Audio Only
You can record audio only from another audio source connected
to the AUDIO IN (R and L) jacks on the back of the VCR or the
AUDIO IN (R and Lmono) jacks on the front of the VCR. (Select
L1 to record from the jacks on the back or L2 to record from the
jacks on the front of the VCR.
1. Press the INPUT button on the remote to select the line input.
The VCR will record audio from the audio equipment
connected to the AUDIO IN jacks.
2. Use SPEED on the remote to select the recording speed.
3. Start audio source playing and press RECORD to begin
recording.
4. Press STOP when you are finished.
Playing Back Audio Only
To get stereo sound, connect the AUDIO OUT jacks of the VCR to
the appropriate input on your amplifier or receiver. Do not use
the phono input. Refer to your amplifier or receiver user’s guide.
Audio Connection
Recording audio only will erase
anything that was previously recorded
on the tape.
3 CH. 4
ANT. IN
RF OUT
VIDEO
AUDIO
IN OUT
L
R
BACK of AMPLIFIER / RECEIVER
PHONO TUNER TAPE
OUT IN
AUX
LEFT
RIGHT
BACK of VCR