RCA VR636HF - Manual (Page 13)

11
Setting Up the VCR
Cable Box Setup
This setup applies only when all channels are received through
the cable box. There are two steps:
• The first sets up the VCR for the output channel of the cable
box signal.
• The second sets up the VCR for a remote-controllable cable
box so the VCR can control the cable box by changing
channels for timer or VCR Plus+ recordings. Position the
remote-controllable cable box above the VCR as shown in the
Connections section.
1. Press MENU to display the VCR MAIN MENU.
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Time
4 Channels
5 Setup
6 Preferences
7 Audio
8 Language
0 Exit
2. Press 4 to display the CHANNELS menu.
CHANNELS
1 Auto Channel Search
2 Add/Remove Channels
3 Signal Type: CABLE
4 VCR Plus+ Channel List
5 Cable Box Setup
6 DSS Setup
0 Exit
3. Press 5 to display CABLE BOX SETUP. Then select one of the
three choices.
CABLE BOX SETUP
Do you use your cable
box to receive ALL
channels or only SOME
channels?
1 ALL channels
2 Only SOME channels
3 Cancel setup
Cable Box Setup
ALL CHANNELS: enter two numbers for
output channel of your cable box or
press INPUT.
ONLY SOME CHANNELS: if you only use
the cable box to tune premium
channels.
CANCEL SETUP: select to cancel.