Radio Shack ET-596 - Manual (Page 7)

7
Placing the Base
on a Desk Top
Follow these steps when you place
the base on a desk, shelf, or table.
1. If you have a single 2-line modular
jack, plug one end of the supplied
modular cord into the
TEL LINE 1/2
jack.
Note: When you make this con-
nection, you should not connect
another modular cord to the
TEL
LINE 2 jack or phone operation will
be erratic.
If you have two separate 1-line
modular jacks, plug one end of the
supplied modular cord into the
TEL LINE 1/2 jack and plug
another modular cord (not sup-
plied) into the
TEL LINE 2 jack.
If you have only one 1-line modu-
lar jack, plug one end of the sup-
plied modular cord into the
TEL
LINE 1/2 jack to use line 1, or to
the TEL LINE 2 jack to use line 2.
2. Plug the supplied AC adapter’s
barrel plug into the DC IN 9V jack.
3. Route the adapter’s cord through
the strain relief slot.
4. Plug the adapter into a standard
AC outlet. The POWER indicator
on the base lights.
Strain Relief Slot
43-696a.fm Page 7 Friday, August 13, 1999 12:48 PM