Radio Shack ET-596 - Manual (Page 18)

18
USING TONE SERVICES
ON A PULSE LINE
Some special services, such as bank-
by-phone, require tone signals. If you
have pulse service, you can still use
these special tone services by follow-
ing these steps.
1. Be sure P
• •
T is set to P .
2. Dial the service’s main number.
3. When the service answers, press
TONE . Any additional numbers
you dial are sent as tone signals.
4. After you complete the call, return
the handset to the base or press
TALK . The phone automatically
resets to the pulse mode.
PAGING
To page the person who has the hand-
set or to locate the handset when the
phone is not in use, press
PAGE on the
base. The handset beeps five times.
Note: Paging does not work during a
call.
MEMORY DIALING
You can store up to 10 numbers in
memory, then dial a stored number by
pressing a one-digit memory location
number.
Note: Each number you store can be
up to 16 digits long.
43-696a.fm Page 18 Friday, August 13, 1999 12:48 PM