Raritan Computer MXU2 - Manual (Page 25)

Chapter 4. Installing MXU2 MXU2 Manual 15
One-Tier Installation
In a one-tier installation, computers are connected to a single MXU2 unit (Figure 12). Complete
the following steps for a one-tier installation:
1. Shut down and power off all computers and monitors to be connected to the
MXU2 .
2. Install user console(s) to the MXU2 .
a) User 1 - Local User Console:
Figure 14 Install Local User Console 1 to MXU2
• Connect user console to appropriate ports on back of MXU2 – keyboard to port labeled
“Keyboard” (6-pin mini-DIN Female), mouse to port labeled “Mouse” (6-pin mini-DIN Female),
and monitor to port labeled “Monitor” (HD15 Female).
• Plug in monitor power cord and turn on monitor.
b) User 2 - Remote User Console (up to 1,000 feet away):
Figure 15 Install Remote User Console 2 to MXU2
B a ck o f M X U 2
V id e o
(H D 1 5 M )
P lu g in
m o n ito r’s
p o w e r c o rd
K e y b o a rd
(M a le )
M o u s e
(M a le )
Connect Local User Console 1 to MXU2