RCA 29086 - Manual (Page 15)

15
S
ETTING THE
10-
DIGIT
R
EGIONAL
A
REA
C
ODES
Depending on your telephone company and your
location, it may be required that you dial a
10-digit number (area code + local number) for
some calls. You can store up to six
10-digit regional area codes.
1. To enter the Options menu, press the OPTIONS
button. OPTIONS MENU < > appears.
2. Press the left or right arrow button until 10
DIGIT AC's appears.
3. Press the OPTIONS button to show the current
regional area code. The default is --- --- ---. The
left-most digit or space flashes, indicating it is
ready to accept the area code entry.
4. Press the left arrow button to choose 9-0 for
the first digit.
5. When the desired digit is flashing, press the
right arrow button to advance to the next digit.
6. Repeat steps 4 and 5 until all the digits for your
regional area code are correct.
7. Press OPTIONS again to store the regional
area code and return to the 10 DIGIT AC's
display.
NOTE: If you make a mistake while setting the
10-digit AC's, you can delete the selected set of
the area code by pressing the DELETE button.
E
XITING THE
O
PTIONS
M
ENU
1. Press the left or right arrow button until EXIT
appears.
2. Press the OPTIONS button to exit the Options
Menu.