RCA 29086 - Manual (Page 10)

10
U
SING THE
AC P
OWER
S
UPPLY
You must use the AC power
supply (included) to operate your
Caller ID unit. The unit is designed
to retain stored records after you
disconnect the adapter or during a
power failure.
CAUTION: Only use the Thomson
5-2491(black)/5-2484 (white) power
supply that came with this unit. Using
other power supplies may damage the
unit.
C
ONNECTING A TELEPHONE
1. To install this unit, disconnect your telephone
by removing the plug at the end of its line cord
from the existing telephone wall jack.
2. Plug the line cord from your telephone into the
jack marked PHONE on this unit.
3. Plug one end of the line cord supplied with
your Caller ID unit into the jack marked LINE
on this unit.