RCA 29086 - Manual (Page 14)

14
S
ETTING THE
L
OCAL
A
REA
C
ODE
The Caller ID unit uses the programmed area
code to determine the number format to display
when a valid Caller ID signal is received and is
also used for the Dial Back feature.
1. To enter the Options menu, press the OPTIONS
button. OPTIONS MENU < > appears.
2. Press the left or right arrow button until LOCAL
AREA CODE appears.
3. Press the OPTIONS button to show the current
local area code. The default is ---. The
left-most digit or space flashes, indicating it is
ready to accept the area code entry.
4. Press the left arrow button to choose 9-0 for
the first digit.
5. When the desired digit is flashing, press the
right arrow button to advance to the next digit.
6. Repeat steps 4 and 5 until all the digits for your
area code are correct.
7. Press OPTIONS again to store the local area
code and return to the LOCAL AREA CODE
display.
NOTE: If you make a mistake while setting the
local area code, you can delete the displayed area
code by pressing the DELETE button.