RCA TV/VCR COMBINATION - Manual (Page 7)

TV/VCR MAIN MENU
1 Screen
2 Time
Setting Up the TV/VCR
5
11. Set the Time and Date (Clock)
To set the clock:
A . Press MENU on the remote to display the TV/VCR MAIN MENU.
B . Press 2 to display the TIME menu.
C . Press 1 to display the SET TIME and DATE screen.
D . Use the number buttons on the remote to enter the time.
• Press 0 before 1; 0 is added automatically before all other
numbers. Press 1 for AM or 2 for PM. Example: For a time of
1:07 PM,
press 0, then 1, then 0, then 7, then 2.
E . Use the number buttons on the remote to enter the date.
• The day of the week will automatically appear after you enter
the year.
• Press CLEAR on the remote at any time to change incorrect
entries.
F. Press MENU on the remote to start the clock.
G . To exit and return to TV viewing, follow the on-screen instructions.
H . To display the time and date, press DISPLAY on the remote.
12. Select a channel and adjust the volume
A . Press CHANNEL up or down or press the number buttons on the
remote to select a channel.
Example: For channel 2, press 0 then 2. The channel number
is displayed on the screen.
For cable channels over 99, press and hold 1 until 1– – appears.
Then enter the next two numbers. Example: For channel 102, press
and hold 1. When 1 - - appears, press 0, then press 2.
B . Press VOL left or right to adjust the volume. The volume display
appears on the screen.
Ch 02
Volume -...............+
TIME
1 Set Time and Date
SET TIME AND DATE
Time --:-- --
(hh:mm)
Date --/--/--
Press MENU to cancel
SET TIME AND DATE
Time 01:07 PM
Date 10/31/98 Saturday
Press CLEAR to correct
Press MENU to set
Startup