Roland AX-7 - Manual (Page 2)

2
Using the unit safely
• Before using this instrument, make sure to read the
instructions below, and the Owner’s Manual.
• Do not open (or modify in any way) the instrument, and
avoid damaging an optional adapter.
• Do not attempt to repair the instrument, or replace parts
within it. Refer all servicing to your retailer, the nearest
Roland Service Center, or an authorized Roland distribu-
tor, as listed on the “Information” page.
• Never use or store the AX-7 in places that are:
• Subject to temperature extremes (e.g., direct sunlight
in an enclosed vehicle, near a heating duct, on top of
heat-generating equipment); or are
• Damp (e.g., baths, washrooms, on wet floors); or are
• Humid; or are
• Exposed to rain; or are
• Dusty; or are
• Subject to high levels of vibration.
• When using an optional adaptor, make sure the line volt-
age at the installation location matches the input voltage
specified on the name plate.
• Do not allow any objects (e.g., flammable material, coins,
pins); or liquids of any kind (water, soft drinks, etc.) to
penetrate the instrument.
• Immediately turn the power off, disconnect the adaptor
from the outlet, and request servicing by your retailer, the
nearest Roland Service Center, or an authorized Roland
distributor, as listed on the “Information” page when:
• Objects have fallen into, or liquid has been spilled onto
the instrument; or
• The instrument has been exposed to rain (or otherwise
has become wet); or
• The instrument does not appear to operate normally or
exhibits a marked change in performance.
• In households with small children, an adult should pro-
vide supervision until the child is capable of following all
the rules essential for the safe operation of the unit.
• Protect the instrument from strong impact.
Do not drop it!
• When using an optional adaptor, do not force it to share
an outlet with an unreasonable number of other devices.
Be especially careful when using extension cords—the
total power used by all devices you have connected to the
extension cord’s outlet must never exceed the power rat-
ing (watts/amperes) for the extension cord. Excessive
loads can cause the insulation on the cord to heat up and
eventually melt through.
• Before using the instrument in a foreign country, consult
with your retailer, the nearest Roland Service Center, or
an authorized Roland distributor, as listed on the “Infor-
mation” page.
• The instrument and the optional adaptor should be
located so their position does not interfere with their
proper ventilation.
• Whenever the instrument is to remain unused for an
extended period of time, disconnect the optional adaptor
if you have one.
• Try to prevent cords and cables from becoming entangled.
Also, all cords and cables should be placed so they are out
of the reach of children.
• Never climb on top of, nor place heavy objects on the
instrument.
• Never handle the batteries or optional adaptor with wet
hands when plugging into, or unplugging from, an outlet
or the AX-7.
• Before cleaning the AX-7, turn off the power and unplug
the optional adaptor from the outlet.
Used for instructions intended to alert
the user to the risk of injury or material
damage should the unit be used
improperly.
* Material damage refers to damage or
other adverse effects caused with
respect to the home and all its
furnishings, as well to domestic
animals or pets.
Used for instructions intended to alert
the user to the risk of death or severe
injury should the unit be used
improperly.
The
●
symbol alerts the user to things that must be
carried out. The specific thing that must be done is
indicated by the design contained within the circle. In
the case of the symbol at left, it means that the power-
cord plug must be unplugged from the outlet.
The symbol alerts the user to important instructions
or warnings.The specific meaning of the symbol is
determined by the design contained within the
triangle. In the case of the symbol at left, it is used for
general cautions, warnings, or alerts to danger.
The symbol alerts the user to items that must never
be carried out (are forbidden). The specific thing that
must not be done is indicated by the design contained
within the circle. In the case of the symbol at left, it
means that the unit must never be disassembled.
AX-7_UK Page 2 Sunday, October 21, 2001 2:12 PM