Radio Shack ET-1123 - Manual (Page 4)

4
Important Caller ID Information
To use the phone's Caller ID and Caller
ID with Call Waiting features, you must
be in an area where those services are
available and you must subscribe to
those services through your local phone
company.
Where Caller ID is offered, one or more
options are generally available:
• caller's number only
• caller's name only
• caller's name and number
READ THIS BEFORE
INSTALLATION
We have designed your phone to con-
form to federal regulations, and you can
connect it to most telephone lines. How-
ever, each device that you connect to
the phone line draws power from the
phone line. We refer to this power draw
as the device's ringer equivalence num-
ber, or REN. The REN is on the bottom
of the base. If you are using more than
one phone or other device on the line,
add up all the RENs. If the total is more
than five (three in rural areas), your
phones might not ring. If ringer operation
is impaired, remove a device from the
line.
FCC STATEMENT
Your phone complies with Part 68 of
FCC Rules. You must, upon request,
provide the FCC registration number
and the REN to your phone company.
These numbers are on the bottom of the
base.
You must not connect your phone to any
of the following:
• coin-operated systems
• party-line systems
• most electronic key phone systems
Note: Your telephone operates on stan-
dard radio frequencies, as allocated by
the FCC. Even though the security ac-
cess-protection code prevents unautho-
rized use of your phone line, it is
possible for radios operating on similar
frequencies within a certain area to unin-
tentionally intercept your conversations
and/or cause interference. This lack of
privacy can occur with any cordless
phone.
43-1123.fm Page 4 Tuesday, September 5, 2000 11:13 AM