Radio Shack ET-1123 - Manual (Page 11)

11
1. Lift the handset and hold down
CALL ID until Caller ID setup menu
appears with Auto Talk selected.
2. Press 2 or
9 9 9 9
to select CIDCW
(Caller ID/Call Waiting).
3. Press SELECT to change the Caller
ID/Call Waiting setting. On or Off
appears indicating the selected set-
ting.
4. Press CALL ID then return the hand-
set to the base to store the new set-
ting.
STORING YOUR AREA
CODE
By storing your local area code in the
phone's memory, the area code does
not appear in the Caller ID record dis-
play if it matches the one you stored.
Follow these steps to store your area
code.
1. Lift the handset and hold down
CALL ID until Caller ID setup menu
appears with Auto Talk selected.
2. Press 3 (or
9 9 9 9
twice) to select Area
Code .
3. Press SELECT , then enter your 3-
digit area code. If you make a mis-
take, repeatedly press
6 6 6 6
or
7 7 7 7
to
move the cursor over the incorrect
digit, then enter the correct number.
Note: If an area code is already
stored, it appears on the display. To
delete the area code, press
DEL/CH
three times. Then enter your new
area code.
4. Press SELECT , then press CALL ID
and return the handset to the base
cradle to store the new setting.
Note: In some areas, the area code is
necessary even for a local call. If you
live in such an area, do not enter the
area code.
43-1123.fm Page 11 Tuesday, September 5, 2000 11:13 AM