Radio Shack ET-1123 - Manual (Page 17)

17
MEMORY DIALING
You can store up to 20 numbers in the
handset's memory and another 10 in the
base's memory, then dial a stored num-
ber by pressing a memory location num-
ber. You can also store a name with
each number in the handset's memory.
The base has four one-touch dial memo-
ries in addition.
Each number you store can be up to 20
digits long, and each name can be up to
13 characters.
You cannot dial a number stored in one
memory location (the base or the hand-
set) using the keypad on the other.
Storing a Name and Number in
Memory
Notes:
• An error tone sounds and the phone
exits the storing process if you wait
more than 20 seconds between key
presses.
• If you receive a call during memory
entry, the phone exits the storing
process.
To store a name and number in the
handset, follow these steps:
1. Lift the handset.
2. Hold down MEM until Memory
Store and a list of memory loca-
tion numbers (and names, if any)
appear.
3. Select an empty memory location
(or the one you want to replace) by
using
8 8 8 8
or
9 9 9 9
to scroll through the
list or entering the location number
(
01 - 20 ). Precede a single-digit num-
ber with a 0 ( 01 , for example).
Notes:
• If the phone sounds five quick
beeps, you have made an entry
error and the number was not
stored. Re-enter the location
number correctly.
4. Press SELECT . Store Name
appears.
• If you do not want to enter a
name, skip to Step 6.
5. To enter a name, use
8 8 8 8
or
9 9 9 9
to
select the characters and
6 6 6 6
or
7 7 7 7
to move the cursor to the next char-
acter space. Repeatedly press
9 9 9 9
to view the characters in alphabeti-
cal order. The display shows upper-
case letters first, then lowercase
letters, numbers, and special char-
acters. Press
8 8 8 8
to view the charac-
ters in reverse order. You can hold
down
8 8 8 8
or
9 9 9 9
to scroll rapidly
through the characters.
If you make a mistake, move the
cursor over the error, then enter the
correct character, or press
DEL/CH
to delete a character. To delete all
the characters, hold down
DEL/CH
for at least 1 second.
6. Press SELECT . Store Number
appears.
43-1123.fm Page 17 Tuesday, September 5, 2000 11:13 AM