Radio Shack ET-1123 - Manual (Page 21)

21
Reviewing Caller ID Records
(Handset Only)
To review the Caller ID records in the
handset's memory, lift the handset and
press
CALL ID . The number of new Call-
er ID records, if any, and the total num-
ber of records appears.
Note: If the handset is faceup on the
base, it shows the number of Caller ID
records, so you can see if you have new
records to review.
Repeatedly press
9 9 9 9
to scroll through
the Caller ID records from the newest to
the oldest, or
8 8 8 8
to scroll back through
the records. To scroll quickly through the
records, hold down
8 8 8 8
or
9 9 9 9
.
When you scroll past the last record,
End appears. When you scroll past the
first record, the record totals appear.
The top line of each record shows the
date, time and the number of calls from
that number. The second line shows the
caller's name, and the third line shows
the caller's phone number.
Note: Calls cannot be reviewed or
stored in the base.
Caller ID Messages
Dialing Numbers From a Caller
ID Record (Handset Only)
To dial a local number stored in a Caller
ID record, recall the record, then press
TALK . If it is a long distance call, press 1
before you press TALK .
Display Description
New: XX
Total: XX
Shows the number
of new Caller ID
records (records you
have not reviewed)
and the total num-
ber of records.
Private Name
or
Private Number
The caller has
blocked the Caller ID
information from
being sent.
Unknown Name
or
Unknown Number
The caller is not
within a Caller ID
service.
Incomplete Data Appears if there was
an error during the
transmission of
Caller ID informa-
tion. Minor electrical
disturbances can
affect Caller ID infor-
mation. Occasional
errors are normal. If
the phone frequently
displays Incomplete
Data, contact your
local telephone com-
pany or RadioShack
store for assistance.
End Appears when you
scroll past the oldest
Caller ID record.
43-1123.fm Page 21 Tuesday, September 5, 2000 11:13 AM