Roberts Radio ecologic 5 User Manual

Page 30

System reset

If your radio fails to operate correctly, or some digits on the display are

missing or incomplete carry out the following procedure.

1. Switch on your radio.

2. Press and hold in the Info button until "MANUAL" appears on the

display.

3. Press the

Tuning Up or Down button until "FACTORY" appears on

the display, press the Select button the display shows "RESET" and

then press the Select button again.

5. A full reset will be performed, the station list and presets will be erased.

The display will show "ROBERTS" and after a few seconds a station

scan search will be performed automatically. The display will show

progress of the station search e.g. ">>>> 18. The number on the right

of the display is the number of stations that have been found.

In case of malfunction due to electrostatic discharge, reset the product

(reconnection of power source may be required) to resume normal

operation.

If a problem persists our technical staff would be pleased to offer any

assistance on operating the radio. Our technical helpline number is

020 8758 0338.

TUNING

SNOOZE

down