Roberts Radio ecologic 5 User Manual

Page 16

Presetting stations

You may store your preferred DAB and FM radio stations to the preset

station memories. There are 10 memory presets in your radio, 5 for DAB

and 5 for FM. Presets are remembered by your radio in the event of a

power failure.

The procedure for setting presets and using them to tune stations is the

same for FM and DAB modes, and is described below.

1. Press the On / Standby button to switch on the clock radio.

2. Tune to the required station as previously described.

3. Press and hold down the required Preset button until the display

shows, for example, "P1 SAVED". The currently tuned station will be

stored under the chosen preset button. Repeat this procedure for the

remaining presets as needed.

4. Stations which have been stored in preset memories may be over

written by following the above procedure.

Recalling a preset station

1. Press the On / Standby button to switch on the clock radio.

2. Press the Band button to select the desired waveband.

3. Momentarily press the required Preset button. Your clock radio will

tune to the station stored in the preset memory.