Roberts Radio ecologic 5 - Manual (Page 26)

25
7,9,11
To return to auto clock set mode
1. Press the On / Standby button to switch on the clock radio. Press
the Alarm button to enter the settings menu. "SET ALM" will appear
on the display.
2. Press the Tuning Up or Down button until "AUTO CLK" appears on
the display. Press and release the Select button.
Note: If you select "AUTO CLK" the current time received will be displayed.
If no DAB signal is found, "NO DABCK" will be displayed. You should then
either position the radio or its aerial so that a signal can be received, or
revert to manual clock mode (see page 23).
1
2
TUNING
SNOOZE
down up
2 2