Figure a-2 . plasmawall setup menu, Video nr (noise reduction), Mpeg filter – Runco PL-43DHD User Manual
Page 73

PlasmaWall Service Remote Control
Runco PL-43DHD and PL-50DHD Owner’s Operating Manual
A-3
Figure A-2. PlasmaWall Setup Menu
Video NR (Noise
Reduction)
To change the Noise Reduction setting on INPUT 1:
1.
Press 1 to switch to PlasmaWall INPUT 1.
2.
Press MENU on the PlasmaWall Service Remote Control.
3.
Press
or
to select SETUP.
4.
Press
to select VIDEO NR, then press SET.
5.
Press
or
to select the desired amount of noise reduction (OFF, LOW, MIDDLE or
HIGH).
6.
Press SET to confirm your selection.
MPEG Filter
To change the MPEG Filter setting on INPUT 1:
1.
Press 1 to switch to PlasmaWall INPUT 1.
2.
Press MENU on the PlasmaWall Service Remote Control.
3.
Press
or
to select SETUP.
4.
Press
to select MPEG FILTER, then press SET.
5.
Press
or
to select the desired amount of filtering (OFF, LOW, MIDDLE or HIGH).
6.
Press SET to confirm your selection.
SET
MENU
MIDDLE
:
:
VIDEO NR
MIDDLE
:
MPEG FILTER
ON
:
CHROMA EE
OFF
:
CINEMA MODE
RGB
:
COLOR SPACE
AUTO
:
CLAMP POSITION
750p
:
SIGNAL
COLOR TEMP.
:
MIDDLE
AUTO POWER OFF
DISABLE
PLASMAWALL
INPUT1
CHANGE
EXIT
PICTURE
SCREEN
SETUP
OPTION