Controls and functions, 1 plasmawall at a glance, Controls and indicators – Runco PL-43DHD User Manual
Page 15: Iminar, Plasmawall at a glance, 1. plasmawall front-panel controls and indicators, Pre l iminar y
Runco PL-43DHD and PL-50DHD Owner’s Operating Manual
5
PRE
L
IMINAR
Y
2.1
PlasmaWall at a
Glance
Figure 2-1 shows the locations of the PlasmaWall front-panel controls and indicators.
Controls and Indicators
Figure 2-1. PlasmaWall Front-Panel Controls and Indicators
1.
POWER INDICATOR
- Lights green to indicate normal operation;
- Flashes green to indicate error conditions;
- Flashes green once per second when the power management feature is active.
2.
STANDBY INDICATOR
- Lights red to indicate that the PlasmaWall is in standby mode;
- Flashes red to indicate error conditions.
3.
DISPLAY STAND
Optional accessory for tabletop installations.
4.
REMOTE CONTROL SENSOR
Receives the signals from the Setup remote control.
2. Controls and Functions
1
2
3
4