Accessories – RIDGID DP15501 User Manual
Page 28
28
ACCESSORIES
Use Only Accessories Designed For This Drill Press To
Reduce the Risk of Serious Injury From Thrown Broken
Parts Or Work Pieces
n
When cutting large diameter holes:
Clamp the workpiece firmly to the table. Otherwise the
cutting may grab and spin it at high speed.
Use only one piece, cup-type, hole cutters.
Do not use fly cutters or multi-part hole cutters as they
can come apart or become unbalanced in use.
Keep speed below 1500/min..
n
Drum sanders must never be operated on this drill press
at a speed greater than 1800/min..
n
Do not install or use any drill that exceeds 7 in. (178
mm) in length or extends 6 in. (152 mm) below the chuck
jaws. They can suddenly bend outward or break.
n
Do not use wire wheels, router bits, shaper cutters,
circle (fly) cutters or rotary planers on this drill press.
- R350CHA (20 pages)
- R350RHA (5 pages)
- R840011 (20 pages)
- 700 (43 pages)
- R844 (16 pages)
- R82015 (20 pages)
- E-924 (1 page)
- R7111 (16 pages)
- K-38 (1 page)
- RB-215 (15 pages)
- R8442 (16 pages)
- JP0610 (44 pages)
- R213BNA (20 pages)
- TP1300 (36 pages)
- TP1300LS (24 pages)
- RT-175 196 (1 page)
- R84040 (20 pages)
- R82320 (16 pages)
- R250AFA (5 pages)
- R8411503 (22 pages)
- R84015 (20 pages)
- AUTOSHIFT R86014 (16 pages)
- R86006 (18 pages)
- R7100 (20 pages)
- R8411511 (22 pages)
- R5010 (18 pages)
- R83001 (20 pages)
- PUMPS (2 pages)
- R6000 (14 pages)
- 904 (1 page)
- JP06101 (40 pages)
- R841151 (22 pages)
- R86007 (32 pages)
- SP6490 (40 pages)
- R8411501 (22 pages)
- R842301 (18 pages)
- R8804 (20 pages)
- R854 (18 pages)
- FINISH STAPLER R150FSA (20 pages)
- R83015 (20 pages)
- SP-1000 (1 page)
- Drain Cleaner K-40B (51 pages)
- R250SFA (20 pages)
- R7130 (18 pages)