Adjustments – RIDGID DP15501 User Manual

Page 26

ADJUSTMENTS

TO ADJUST THE BELT LATCH GUARD

See Figure 29.
The button latch is adjusted at the factory to be self latching
when the pulley guard lid is closed.
If adjustment is needed.
n

Loosen the two screws securing the latch to the lid and

move latch back until the lid closes without depressing
the button.

The button can also be adjusted up and down to assure

lid closes tight by loosening the two screws in back of
the latch button, and moving the button up or down as
needed.

Fig. 29

SCREW

BUTTON

LATCH

SET

SCREW

SPINDLE

PULLEY

HEX

NUT

MOTOR

PULLEY