RCA 25450 - Manual (Page 98)

10. The ID entered in step 6 will be assigned to the next Cordless Handset requesting
registration.
Sound (Cordless Handset)
The phone’s volumes and tones can be adjusted to the user’s preferences including:
Cordless Handset Receiver, Speakerphone, and Headset volumes.
Receiver, Speakerphone, or Headset Voice Volume (Cordless Handset)
Adjust the voice volume of the person you are listening to on the line by pressing
5
or 6 on the Navigation button. There are 6 levels of volume. The selected vol-
ume will remain in effect for future phone calls until changed.
1. To increase voice volume, press the 5 on the
Navigation button.
2. To decrease voice volume, press the 6 on the Navigation button.
Ring Volume and Vibrate Settings (Cordless Handset)
Ring volume controls the ringer volume for incoming calls and pages. The volume
can be adjusted by pressing 5 or 6 on the Navigation button.
1. Press 5 or 6
on the Navigation button to increase/decrease ringer volume.
2. The display will show the ring volume level and vibrate settings (“Vibrate & High,
Vibrate, High, Medium (Default), Low and Off”) and the phone will play the ring
volume and/or vibrate at each volume level as the options are scrolled through.
The displayed volume level will be selected if no action is taken in 5 seconds.
NOTE: If you select a Vibrate setting, the Cordless Handset will ring instead of vibrating when
it ‘s in the Charging Cradle, and will vibrate when removed from the cradle.
3. To accept the volume setting, press the Exit button.
Using the Menu System
1. Press the soft button.
Settings and Adjustment