RCA 25450 - Manual (Page 94)

7. The display will show the key tone (1–4) and the phone will play the key tone as
the options are scrolled through.
8. To accept the key tone setting shown on the display, press the soft
button.
Cordless Handset Setup
Register Cordless Handset (Base Unit and Cordless Handset)
Cordless handsets must be registered with the Base Unit before use. If the Cordless
Handset was purchased with the Base Unit as a system, the Cordless Handset has
already been registered. The ID will be displayed when the Cordless Handset is pow-
ered on. If the Cordless Handset has not been registered or the registration has been
deleted, the display shows “Please register”.
NOTE: You must program both the Base Unit and the Cordless Handset to register the
handset. Have both units ready to program as you must complete registration of the handset
within 30 seconds after programming the Base Unit.
1. On the Base Unit, press the soft button.
2. Press 5 or 6 on the Navigation button to scroll through the options until
“Registration” appears on the display.
3. Press the soft button.
4. “Register HS” appears on the display. Have the Cordless Handset ready to
program.
5. Press the soft button.
6. The display will show “Press REGISTER in HS menu options.” A 30 second timer
will begin at this point. If the registration process is not completed in this time,
the process will be canceled.
Settings and Adjustment