Radio Shack ET-537 - Manual (Page 17)

17
DIALING A STORED
NUMBER
1. Lift the handset from the cradle.
(Press TALK if you do not hear a
dial tone).
2. When you hear a dial tone, press
MEMORY and then press the
memory location number where
the phone number is stored. The
phone dials the stored number.
Important: If you want to test a stored
number of an emergency service,
make the test call in the off-peak
hours, such as late evening or early
morning, and remain on the line to ex-
plain the reason for your call.
CLEARING A MEMORY
LOCATION
To clear a stored phone number from a
memory location, press
MEMORY
twice, then press the memory location
number. A long beep sounds. The
phone number is now cleared from
memory.
Note: If the phone does not sound a
long beep, it did not clear the number.
Try again.
CHAIN DIALING
NUMBERS
When calling special services (such as
alternate long distance or bank by
phone), dial the service’s main number
first. Then, at the appropriate place in
the call, press
MEMORY and the mem-
ory location number where the addi-
tional information is stored.
43-1037.fm Page 17 Tuesday, August 17, 1999 10:05 AM