Russound MCA-C5 - Manual (Page 10)

10 Russound MCA-C5 User and Installation Manual
KEYpAd USAGE
Main Menu - Sleep Timer
You can set the timer so the zone turns off in one of the following increments:
15, 30, 45, or 60 minutes.
Main Menu - Settings
Audio - From the home screen, scroll to and select "settings," and choose
"audio settings." You’ll see items to adjust, such as bass, treble and balance.
Each selection has its own screen and shows levels for real-time adjustments.
Clock
Set Time - From the Clock menu, select "Set Time." Press the +/- buttons to
move through numbers. Press the |< or >| buttons to move the cursor and
press OK to save.
Set Date - From the Clock menu, select "Set Date." The date format is
month/day/year. Press the +/- buttons to move through numbers. Press
the |< or >| buttons to move the cursor, and press OK to save.
Clock Format - From the home menu, select "Settings," then "Clock." Choose
"Clock Format," and select 12 hour (AM/PM) or 24 hour (1200) format.
Display - Set the contrast and brightness for the keypad display. Use the
buttons to move the cursor to the desired level.
Installer Options
IR Enable/Disable - The default is Enabled. If an external IR receiver is used,
the keypad IR receiver should be disabled. From the main menu, select
"Settings," then "Installation," then IR Enable/Disable. Select "disable" and
exit back to the menu.
Diagnostics - The MDK-C5 provides the portal to a support tunnel when an
installer needs Russound’s help troubleshooting an MCA-C5 system. From
the main menu, select "Settings," then "Installation." Choose "Authorize
Support." On the Authorize support screen, select "On." A session number
will be provided in the Session Number box. During the support tunnel
process, the system is unavailable for use.
AM/FM 7:30 PM
Alarm
Home
Shared
Party Mode
Settings
Sleep Timer
Do Not Disturb
DND
AM/FM 9:30 PM Sleep Timer
After 15 minutes
Cancel
After 30 minutes
After 45 minutes
After 60 minutes
Main Menu - Set Party Mode or Do Not Disturb
Party and Master - The keypad that shows Master has started a "party" and
keypads that show Party are "attending." All rooms are listening to the same
music, and only the Master can change the music. Volume control remains
independent.
Do Not Disturb - Someone in another room has chosen a source and locked
out anyone else from changing it. That room also won’t be disturbed by paging
or a doorbell chime.