Radio Shack TAD-1026 - Manual (Page 3)

3
Toll Saver — lets you avoid unneces-
sary long-distance charges when you
call by long-distance to check messag-
es.
Adjustable Ring Number — lets you
set the TAD to answer the phone after
two rings, four rings or seven rings.
Call Screening — lets you listen while
the caller leaves a message so you can
decide whether or not to answer the call.
Phone Pick-Up Detection — stops re-
cording when you pick up any phone on
the same line as the TAD (including the
TAD’s handset), and resets to answer
the next call.
Memo Recording — lets you leave
messages for yourself or others in your
home or office.
Room Monitor — lets you listen from a
remote phone to the room where you in-
stalled the TAD.
Remote On/Off — lets you turn the TAD
on or off when you are away from your
home or office.
Telephone Features
Priority Memory Dialing — lets you
store a phone number in one of three
memory locations and call that number
with the touch of a button.
10 Indirect Memory Locations — let
you quickly dial frequently-called num-
bers.
Flash — sends an electronic switchhook
signal for specialized telephone services
such as Call Waiting.
Privacy — lets you talk to someone else
in the room without being overheard by
the person on the phone.
Pause — lets you store a pause in a
memory number.
TONE Button — lets you use computer-
ized tone services with a pulse line.
Hold — lets you put a call on hold; an in-
dicator lights to remind you the call is on
hold.
Ringer Volume Switch — lets you ad-
just the ringer’s loudness or turn it off.
Handset Volume Control — lets you
adjust the handset’s volume.
Hearing-Aid Compatibility — lets you
use the phone with any hearing aid that
has a T (telephone) switch.
43-786.fm Page 3 Monday, August 16, 1999 8:02 AM