Roland BR-864 - Manual (Page 64)

64
Using the loop effects/Track EQ
Setting the Track EQ
This section explains how to edit the Track EQ settings
(parameters).
For a fuller description of Track EQ, refer to “Track EQ
Parameter Functions” (p. 133).
Track EQ do not have “patches.” Loop effect settings are
saved along with the song data.
If you want to save the settings in the currently selected
song, hold down [STOP], and press [REC].
1. Press [EQ].
2. Use CURSOR [ ] [ ] and the TIME/VALUE dial to
set the EQ On/Off for each track.
* Pressing a REC TRACK button moves the cursor to the track
corresponding to the button pressed.
Pressing [TRACK] switches to between Tr1–4 and Tr5–8.
fig.01-711d
3. To change the EQ settings, press CURSOR [ ]
repeatedly to display the parameter screen, then turn
the TIME/VALUE dial to change the settings value.
fig.01-712d
4. After you have completed the setting, press [EQ] or
[EXIT] to return to the Play screen