Renesas M302N2 - Manual (Page 28)

( 26 / 38 )
Chapter 4. Specifications
4.1 Specifications
Table 4.1 lists the specifications of the M302N2T-PRB.
Table 4.1 Specifications of M302N2T-PRB
PC4701
M30200T-RPD-E
M302N1 and M302N2 Group MCUs
Single-chip mode
1 MB
X
IN
= 10.0 MHz (no-wait, 4.2 - 5.5 V)
4.2 - 5.5 V
Max. 8 bytes
16-byte dump: approx. 312 BCLK cycle
16-byte fill: approx. 283 BCLK cycle
1. Supplied from the emulator main unit
2. The operating voltage of the emulation pod main unit is
determined by detecting the supply voltage of the target
system. When no target system is connected, or when the
supply voltage of the target system is more than 5.0 V, the
operating voltage is 5.0 V.
5 to 35
°
C (no dew)
-10 to 60
°
C (no dew)
M302N2 Group: for 80-pin 0.65-mm-pitch QFP (80P6S-A)
FLX-80QSB (included) or DIRECT80S (not included)
M302N1 Group: for 56-pin 0.65-mm-pitch QFP (56P6S-A)
M302N1T-56FPB (not included)
Emulator
Emulation pod main unit
Applicable MCUs
Usable MCU mode
Emulation memory
Max. operating frequency
Operating power voltage
Stack capacity for the emulator
Suspended cycles in run-time debug
Power supply to emulation pod
Operating temperature range
Storage temperature range
Connection to the target system
See "3.4 Connecting the Target
System" (page 21).