Roland EP-760 - Manual (Page 21)

21
Recording your performance
Start recording
F Recording will start when you either press the
[®(Play)] button or play the keyboard.
The ep-760 counts down two measures, then recording
starts.
Note that recording will also begin as soon as you play
a note on the keyboard, even if you do not press the
[®(Play)] button. There is no count sound played
when you start in this manner.
When recording begins, the [®(Play)] button and
[
●(Rec)] button indicators will light. Go ahead and
perform on the keyboard.
If you record without specifying the recording track, the per-
formance will be recorded to the [1] button.
If you want to record the left and right hands on separate
tracks, refer to “Selecting/recording each hand separately”,
p. 22.
Stop recording
G Press the [®(Play)] or [ ●(Rec)] button.
The indicators for the [®(Play)] and [ ●(Rec)] buttons
will go dark.
About the “USr” display
When you stop recording, the “USr” display will change to
“Usr.”. (The “.” in the display indicates that the song mem-
ory now contains your performance.
Starting playback
H Press the [®(Play)] button.
You will hear the recorded performance.
Once again press the [®(Play)] button, and playback
will stop.
Recording along with a song
You can record a performance that you play along with an built-in song. Using the [1] or [2] buttons, you can (for example)
perform and record just the right-hand part of a song while listening to the left-hand playback of a built-in song.
Selecting the song to record
A Press the [Song/Tempo] button, getting its
indicator to light in red.
The display will indicate the song number.
B Use the [+] or [–] button to select the song that
you want to play.
C As necessary, set the metronome and tempo
(p. 14).
D Press the [ ●(Rec)] button.
The [ ●(Rec)] button’s indicator will light.
Selecting the track to record
E Press the [1] or [2] button.
When you want to record the left-hand performance,
press the [1] button; to record your right-hand part,
press the [2] button.
The indicators of the button you pressed and of the
[®(Play)] button will flash, and the ep-760 enters re-
cording-standby mode.
If “dEL” appears in the display, refer to p. 20.
Start recording
F Press the [®(Play)] button.
Recording begins after two measures of count sound.
Play along with the song.
Stop recording
G Press the [®(Play)] or [
●(Rec)] button.
Recording will stop, and the indicators for the
[®(Play)] and [
●(Rec)] buttons will go dark.
The recorded performance is stored in “USr (User).”
Play back the recorded performance
H Press the [®(Play)] button.
You will hear the recorded performance.
Once again press the [®(Play)] button, and playback
will stop.
4, 7 3 6, 8 2 5 1
ep-760.GB Page 21 Thursday, May 16, 2002 8:03 PM