Roland DP-900 - Manual (Page 30)

30
Recording Your Performance
Stop recording
5. Press the [Play] or [Rec] button.
Recording will stop, and the indicators for the [Play] and [Rec] buttons will
go dark.
Your performance has been recorded to the specified track button.
If you want to record on the other track, return to step 2 to record your
performance again. You can record while you listen to the previously
recorded performance.
Play back the recorded performance
6. Press the [Play] button.
You will hear the recorded performance.
Press the [Play] button once again, and playback will stop.
Erasing Recorded Performances
You can erase a recorded performance.
■
Erasing a Performance from the Specified Track
You can select a recorded track and erase it.
1. Hold down either the [1] or [2] button and press the [Rec]
button.
The indicator of the button you pressed will go dark, and the performance of
the selected track will be erased.
■
Erasing a Song
You can erase a song you’ve recorded.
1. Hold down the [Song/Tempo] button and press the [Rec] button.
The following display will appear, and the [Rec] button’s indicator will blink.
fig.disp-del
2. Once again press the [Rec] button.
The recorded performance is erased.
If you decide not to erase the performance, press the [Play] or [Song/Tempo]
button.
When a recorded
performance is played
back, the metronome
sounds the sound that was
selected when the
recording was made.
DP-900_e.book 30 ページ ２００４年１１月２９日 月曜日 午後１２時５８分