Roland DP-900 - Manual (Page 14)

14
Before You Start Playing
Turning the Power On and Off
■
Turning On the Power
941
Once the connections have been completed, turn on power to
your various devices in the order specified. By turning on
devices in the wrong order, you risk causing malfunction
and/or damage to speakers and other devices.
1. Turn the [Volume] knob completely to the left to
lower the volume to the minimum level.
fig.00-04
2. Push the [Power] switch to turn on the DP-900.
After a few seconds, the unit becomes operable and
playing the keyboard produces sound.
Adjust the volume to obtain the proper volume level.
fig.00-05.e
942
This unit is equipped with a protection circuit. A brief interval
(a few seconds) after power up is required before the unit will
operate normally.
■
Turning Off the Power
1. Turn the [Volume] knob completely to the left to
lower the volume to the minimum level.
fig.00-04
2. Push the [Power] switch to turn off the DP-900.
fig.00-06
Adjusting the Sound’s Volume
and Brilliance
Turn the [Volume] knob to adjust the overall
volume.
Press the [Brilliance] button to adjust the
brightness of the sound.
Select one of the three available settings to obtain the desired
brilliance.
fig.00-07.e
Raising the volume excessively may cause the sound to
distort. Enjoy the piano at an appropriate volume level.
ON
Lower position
OFF
Upper position
[Brilliance]
button’s indicator
Off Lit in red Lit in
green
Brilliance Medium Mellow Bright
Min Max
DP-900_e.book 14 ページ ２００４年１１月２９日 月曜日 午後１２時５８分