RCA VR602HF - Manual (Page 16)

14
Playing a Tape
Operating Instructions
To play a tape
1 . Turn on the TV and tune it to channel 3, 4, or the TV’s video input to see the
picture from the VCR.
2 . Insert a tape in the VCR.
The VCR automatically turns on. The VCR indicator lights if the AUTO TV/VCR
feature is turned ON . The tape automatically begins playback if the safety tab
on the cassette has been removed and the AUTO PLAY feature is turned on.
3 . Press PLAY , if necessary.
4 . Press TRACKING up or down on the remote or the VCR to remove any streaks
from the picture if necessary. Details are on page 18.
5 . Press STOP•EJECT on the VCR or STOP on the remote.
6 . Press REW on the VCR or the remote.
The VCR automatically rewinds the tape if it reaches the end of the tape during
playback. Also, if you press
POWER while a tape is rewinding, the VCR turns
off automatically when it is completely rewound.
7 . Press STOP•EJECT on the VCR to eject the tape once it is completely rewound.
CHANNEL
POWER VCR TIMER RECORD
REW PLAY FWD RECORD POWER STOP•EJECT PAUSE TV•VCR
TRACKING
Hi-Fi STEREO SAP
Safety Tab