Radio Shack 43-3901 - Manual (Page 4)

4
1
Install batteries
1. Use a flat-blade screwdriver to open the battery
compartment cover.
2. Insert four AA batteries into
the compartment according
to the polarity symbols
(+ and –) marked inside.
3. Replace the battery
compartment cover.
b
Battery Notes:
• When ( appears or the display dims, replace the
batteries.
• During battery replacement, keep the line cord plugged in and
replace the batteries promptly to maintain Caller ID memory.
• Dispose of old batteries promptly and properly.
• Do not burn or bury batteries.
• Use only fresh batteries of the required size and type.
• Do not mix old and new batteries, different types of
batteries, or rechargeable batteries of different capacities.
• If you do not plan to use the phone for two weeks or
longer, remove the batteries. Batteries can leak chemicals
that can destroy electronic parts.
2
Mount your phone
You can mount your phone on a wall plate, directly
on a wall, or place it on a shelf, desk, or table.
Placing the phone on a flat surface
1. Plug one end of the long phone
cord into the jack on the back end
of the base.
2. Plug the other end of the cord
into a modular phone jack.
AA
AA
AA
AA