Radio Shack 43-3901 - Manual (Page 11)

11
Caller ID Operation
If you subscribe to Caller ID service, the phone automatically
displays incoming call information and stores the information
in Caller ID memory. The system can store up to 99 incoming
phone numbers or 64 incoming names and phone numbers.
The phone company also sends the correct time between the
first and second rings to update your system’s display.
Reviewing Call Records
Repeatedly press UP or DOWN to review the new calls. After all
new calls have been reviewed, END OF NEW CALL appears.
To review all the records from oldest to newest, press UP. To
review the records from newest to oldest, press DOWN. After
reviewing all records in memory, END OF LIST appears.
• If an incorrect, invalid, or incomplete Caller ID signal is
received, LINE ERROR appears on the display.
• If the name and number are not available due to the
caller’s restriction, PRIVATE CALL appears on the display.
• If the name and number are not available,
--UNAVAILABLE-- appears on the display.
• RPT appears with a number if you have received a call
from the same phone number more than once.
• If you do not press a button within about 15 seconds, the
system automatically returns to the normal display.
Calling Back from Caller ID Memory
Option 1
1. With the handset hung up on the base, press UP or DOWN
button to find the number to be dialed.
2. Press CALL BACK twice. PICK UP CALL appears.
3. Lift the handset, and the number is redialed automatically.